>> -----Original Message-----
>> From: Eddie C. Dost [mailto:ecd@atecom.com]
>> Sent: Tuesday, February 03, 2004 2:17 AM
>> To: IANA
>> Subject: Re: FW: General Request for Assignments (if-type) (Dost)
>>
>>
>> Dear IANA,
>>
>> let me try to clearify why we would like to register
these if-types.
>>
>> The types dvbSpiIn and dvbSpiOut are not proprietary,
these are the
>> synchronous parallel interfaces described in DVB-PI or EN 50083-9.
>> Our equipment supports these interfaces in some
configurations. There
>> are configuration with only input interfaces and
configurations with
>> only output interfaces.
>>
>> The equipment always uses these interfaces in High
Quality Video over
>> ATM applications, so for the input interface we take the
MPEG of the
>> DVB-SPI and put that into AAL1, for the output interface
we take an
>> AAL1 ATM stream and output that on the DVB-SPI interface.
>>
>> The interfaces themself comply to the DVB Standards.
>>
>> sdtiIn and sdtiOut interfaces are compliant to the standard
>> SMPTE 305M-2000 (Society of Motion Picture and Television
Engineers).
>>
>> These interfaces are used the same way as the DVB-SPI interfaces,
>> namely input or output only, and for transport of High
Quality Video
>> over ATM.
>>
>> We would like to register these if-types to use them in our SNMP
>> management for our systems. The if-types are free to be
used by others
>> for the same purpose. If there is a standard SMPTE or DVB MIB for
>> management of DVB-ASI, DVB-SPI or SMPTE SDTI interface I would be
>> glad to hear about. If you know such a standard, please send
>> a reference
>> to this, as it is not known to me at current.
>>
>> If you need further information, please feel free to contact me.
>>
>> Best regards,
>> Christian Dost
>>
>> > Dear Christian,
>> >
>> > Our if-type experts have reviewed your application.
>> > Comments are inline.
>> >
>> > Best regards,
>> >
>> > IANA
>> >
>> > -----Original Message-----
>> > > From: ecd@atecom.com [mailto:ecd@atecom.com]
>> > > Sent: Thursday, January 15, 2004 3:31 AM
>> > > To: iana@iana.org; ecd@atecom.com
>> > > Subject: General Request for Assignments
>> > >
>> > >
>> > > Contact Name :
>> > > Christian Dost
>> > >
>> > > Contact Email :
>> > > ecd@atecom.com
>> > >
>> >
>> >
>> > > Type of Assignment :
>> > > interface types: dvbSpiIn, dvbSpiOut, sdtiIn, sdtiOut
>> > >
>> >
>> > This requester also should explain why he/she needs an
>> > ifType for xxxIn and xxxOut and not one that can be used for
>> > both in and out.
>> >
>> > > Registry :
>> > > IANAifType-MIB
>> > >
>> >
>> >
>> > > Description :
>> > > The requested interface type assignments are used in our
>> > > Video over ATM devices together with the allready
>> existing interfaces
>> > > dvbAsiIn and dvbAsiOut. Please feel
>> > > free to assign any free number for these interfaces.
>> > >
>> > So...
>> > - it sounds as if it is a proprietary ifType. If so, we
want to see
>> > that expressed in the name. e.g. something aka: atecomDvbSpiIn
>> > - If not, then we want to try to udnerstand how/why
this is generic
>> > and public. We want to understand it does not conflivt with
>> > DVB standards.
>> > - We would like to see some documentation that shows
how this works
>> >
>> >
>> >
>> > > Additional Info :
>> > >
>> >
>>
>> Eddie C. Dost manager firmware
>> ATecoM GmbH
>> ecd@atecom.com
>> Pascalstr. 67
>> Phone: +49 2408 9596 0 Fax: +49 2408 9596 900
>> D-52076 Aachen
>> GSM: +49 172 9312808
>> Germany
>>